« Back to Home

Return Home To Find A Flood? 4 Steps To Take When You Find A Broken Water Pipe

Posted on

Broken water pipes can lead to extensive damage inside your home, especially if you're gone when they break. The steps you take after you discover the break can determine how much damage your home sustains. Here are four steps to take as soon as you discover the flood.

Turn The Water Off

You should turn the water off to the house as soon as you discover the broken pipe. If you've been away for an extended period of time, you may have a substantial amount of water inside your home. Turning the water off will stop the leak, and will allow you the opportunity to locate where the water is escaping from.

Locate The Leak

You'll want to search your home for the source of the leak. You should begin your search under sinks and around your toilets. If those areas aren't the source of your leak, you should take a flashlight and head up into the attic. Many of your water pipes are located in the ceiling and attic.

Seal The Damage

Now that you've located the leak, it's important that you seal it off until the plumber can take care of permanent repairs. Here's a quick way to temporarily repair a leaking water pipe.

Supplies You'll Need

  • 12" piece of rubber – an old bicycle tire, inner tube, or radiator hose will work well

  • Small block of wood

  • Sharp knife

Directions

  1. Use a sharp knife to cut a 12" piece of rubber from your tire, inner tube or radiator hose.

  2. Make lengthwise cut in the rubber piece.

  3. Wrap the rubber around the pipe.

  4. Place a block of wood on the pipe, directly over the leak.

  5. Place your C-clamp on the pipe and tighten it down to apply pressure to the leak.

  6. Turn the water back on and check to ensure that the leak has stopped.

Remove The Standing Water

The emergency repair will prevent further leaking until your plumber can take care of permanent repairs. While you're waiting for the plumber to arrive, you'll need to clean up the standing water. Water inside your home can lead to mold growth and foundation damage. The easiest way to remove standing water is with sump pumps. The sump pumps will extract all the water from your home. If it's a small area that was flooded, you can use a wet/dry vacuum to get rid of the water. Once you've removed the water, you'll want to set up industrial fans to dry out the carpeting, walls and foundation. This will get rid of the moisture that can lead to mold growth.

Broken pipes can cause significant damage to your home. As soon as you discover standing water in your home, you can follow these steps to repair the leak and remove the water.

For more information, or if you would like professional assistance, visit http://cbrothers.com or a similar website.


Share